S250-8P · Universal 8-sleeve pile cap

Replace bored piers & screw piles in about 10 minutes per footing

Up to 100kN capacity with 4, 6 or 8 micropiles driven in 2, 3 or 4 directions — built for tight sites with underground services, boundaries, slopes and internal corners.

  • No reinforcement cage
  • No cast-in hold-down bolts
  • Galvanised micropiles
S250-8W

100kN

Load capacity (up to)

~10 min

Install time per cap

8 sleeves

4, 6 or 8 micropiles

2 · 3 · 4-way

Pile drive directions

BUILT FOR DIFFICULT SITES

Multiple sleeve directions let you steer piles around obstacles instead of redesigning the footing.

Underground services

Drive piles parallel to services in a 2 or 3-way orientation to avoid clashes.

Boundaries

Point piles away from the boundary line and keep footings where the plans need them.

Steep terrain

Compact, lightweight caps install in tight spaces, even on sloping blocks.

Internal corners

Choose pile directions that suit the geometry rather than forcing a standard layout.

THE ECONOMICAL ALTERNATIVE

The S250-8P replaces bored piers and screw piles under slab on ground, strip footings and concrete pads.

  • Replaces bored piers
  • Replaces screw piles
  • Replaces concrete pads
  • Removes the reinforcement cage and cast-in hold-down bolts

WHERE IT’S USED

Residential, modular buildings, sea containers, tie-downs, mining, commercial, solar, decks, patios, sheds, fences, retaining walls and more.

20160503_133759

Residential homes

Eight micropiles keep your home level and stable over time, and fast installation shortens the build so you move in sooner.

Quote my home build →

313005466_527495752718202_4516238870466033204_n

Near boundaries & services

Multiple sleeve options let piles run parallel to underground services and clear of boundaries. Identify service locations and depths at design stage.

Discuss a tricky site →

Light & camera poles

Supports light poles, air and traffic monitoring equipment and camera poles. For taller poles with a higher bending moment, see the S400-12P.

Quote a pole footing →

TECHNICAL SPECIFICATIONS

Everything your engineer or builder needs to specify the S250-8P.

Load capacity Up to 100kN
Micropiles Up to 8 × 32NB (nominal bore), 42.4mm OD galvanised pipe — light, medium or heavy
Pile configuration 4, 6 or 8 piles; 2, 3 or 4-way direction
Bolting pattern 140mm centres × 4 × 22mm holes
120mm centres × 4 × 18mm holes
Installation time Approx. 10 minutes
Applications Residential, modular buildings, sea containers, tie-downs, mining, commercial, solar, security & light poles, decks, patios, sheds, fences, retaining walls

HOW QUOTING WORKS

01

Send your plans

Share drawings, footing loads and soil information if you have them.

02

Mark your services

Include the location and depth of underground services so pile directions can be set at quote stage.

03

Get your quote & install

We specify 4, 6 or 8 piles for your loads and soil, then install fast.

GET AN S250-8P QUOTE

Tell us about your project, including loads, soil information and the location of any underground services, and we’ll come back with the right pile configuration and a price.

Prefer to talk? (08) 9434 3161

Swivelpole™ partnership: Giraffe Pole™ G5 and F7 freestanding poles are available to pair with the Surefoot S400-12P pile cap. Learn more about Swivelpole™.